 |
 |
 |
|
The Professional Products Power+Plus TYPHOON Manifold for injected
Mustangs is a breakthrough in styling and performance. Available in
satin or a highly polished show finish at a price that is hard to
believe, this manifold is suitable for high performance street use,
bracket racing, nitrous, or supercharged applications. Use the
Professional Products 70mm Throttle Body for optimum performance. On
1993-’95 applications, use our Elbow Adapter #54150 or 54151 and Strut
Tower Brace #M-20201-A51 from Ford Racing or #5225 from Edelbrock for
proper clearance. 1994-’95 applications also require our #54152 EGR
Adapter. Note that the Professional Products Upper Plenum is available
separately and can replace the Upper Plenum on an Edelbrock Performer
#3821 or Performer RPM #7126. The base or lower intake manifold is also
available separately. For 351W use our 54126/54127 manifold base with
our 54124/54125 upper plenum.
Note: This manifold assembly is a stock replacement part for 1986-’95
Ford Mustangs with 5.0L V8 engines and has provision for EGR and PCV. |
|
|
|
|
|
 |
|
 |
|
Features
- 1986-1995 Ford Mustangs with 5.0L V8
Polished Finish
RPM Range: 1500 to 6500
This manifold assembly has provision for EGR and PCV
Use Fel-Pro #1 250 Intake Gasket with this manifold
Air valve location is 0.30-inches higher and 0.50-inches forward of stock location
Suitable for high performance street use, bracket racing, nitrous, or supercharged applications
Use 70mm Throttle Body for optimum performance. Professional Products TB is available.
|
|
|
 |
|
 |
|
|
|
