 |
 |
 |
|
New Throttle Bodies from Professional Products are made from permanent
mold castings of 356 aluminum. They are offered in all popular sizes
for Ford Mustang injected engines. Note that for street legal
applications the 1986-'93 Throttle Bodies must be used with our
companion EGR Plates. The 1994-'95 Throttle Bodies do not require an
EGR Plate. Our Throttle Bodies are offered in a polished and satin
finish, adding a custom touch to any injected Mustang. Early model
Throttle Bodies include an OEM throttle position sensor. Use the 65mm
model for stock manifolds, the 70mm model is ideal with our EFI Mustang
Intake System, and the 75mm is for higher horsepower engines which will
require matching to the intake port on most manifolds. Note: Throttle
Bodies are 50-state street legal when used on 1986-'95 Ford Mustang
5.OL V8.
We
offer Power Throttle Bodies for the 1997-'01 Acura Integra Type R and
also for the 1994-'01 Acura Integra GSR. We have both 68mm and 70mm
throttle bodies for these two engines. Each size is available in either
a show polished or satin finish. These throttle bodies are made as
aluminum die castings and as such, appear very similar on the outside
to a stock throttle body. However, the main inlet on all of these
throttle bodies features a 3" O.D. which allows the use of many of the
popular air inlet kits.
- 1986-93 Mustang 5.0L: EGR plate for 65mm Throttle Body, Polished
- Note: for street legal
applications an EGR plate is required for a Throttle Body
- 69200 is the matching 65mm polished Throttle Body
|
|
|
|
|
|
|
|
|
